配件
M series
-
Independent LEDs, indicate the status of the battery
-
Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable
-
The system automatically change to another frequency in the presence of radio interference
-
Eco power management system. Save on batteries
-
It can receive and display via 12 LEDs signals coming from the receiver (relay action feedback)
-
Mushrooms type EMO button
-
Internal BootLoader, up firmware to the date by using computer
-
QI wireless charging competiable
Technical Data
Layout
2*Joystick, 6*Paddle
& Switches
Weight (including battery)
approx. 1036g
Dimensions
200×141.3×139mm
Frequency band
315 / 418 / 429 / 433 / 447 / 470 / 915 MHz / 2.4 GHz
Channel space
12.5 kHz
Number of available on/off command
max. 24 + Start and EMO
Hamming distance
≥ 15
Radio communication
bi-directional
Frequency handling
Automatic and dynamic switching between 2 channels
Power supply
LR6(AA)1.5V / NiMH(AA)1.2V x2
Stop command response time
~ 50 ms
Command response time
~ 50 ms
Protection degree
IP65
Operating and storage temperature
(-25°C)~(+55°C) / (-40°C)~(+85°C)
Housing material
PA6 (GF30%)
Fully Customized
Features
Roll-over Protection
When the device is overturned or there is an abnormal handle operation, the EMO will automatically lock and shut down in the overturned state, and the latter will invalidate the command.
My Drive, My Secretary
"My DRIVE" offers the user to activate a spare transmitter in just a minute. Users simply bring the original battery bay and insert it to the spare transmitter.
QI Wireless Charging Compatible
No more messy and incompatible cables, charging is just that easy.
.png)
+
MyMODE: Always in safe hands
JUUKO "MyMODE" allows you to set restricted controlling mode settings in your crane or machine system that promote safe and responsible controlling. You can limit top speed, Multi-control System, transmitting power and more.
MyMODE
Extreme precision
We make our joystick perfect by the following manufacturing procedure.
A liitle big help: Data Feedback
The ''Data Feedback'' function enables the visualization of status through 12 LEDs. These 12 LEDs are programmable to see the actual STATUS of each relay in receiver.
Stronger than ever!
Ultra-high impact resistant corner bumper.
.png)
_edited.jpg)
