• Independent LEDs, indicate the status of the battery

  • Activation of the transmitter is protected by an electronic key-code and an auto shut-off option which is programmable

  • The system automatically change to another frequency in the presence of radio interference

  • Eco power management system. Save on batteries

  • It can receive and display via 12 LEDs signals coming from the receiver (relay action feedback)

  • Mushrooms type EMO button

  • Internal BootLoader, up firmware to the date by using computer

  • ​QI wireless charging competiable

Technical Data


2*Joystick, 6*Paddle

&  switches


Weight (including battery)

approx. 1036g




Frequency band

315 / 418 / 429 / 433 / 447 / 470 / 915 MHz / 2.4 GHz

Channel space

12.5 kHz

Number of available on/off command

max. 24 + Start and EMO

Hamming distance

≥ 15

Radio communication


Frequency handling

Automatic and dynamic switching between 2 channels

Power supply

LR6(AA)1.5V / NiMH(AA)1.2V x2

Stop command response time

~ 50 ms

Command response time

~ 50 ms

Protection degree


Operating and storage temperature

(-25°C)~(+55°C) / (-40°C)~(+85°C)

Housing material

PA6 (GF30%)


A liitle big help: Data Feedback 

The ''Data Feedback'' function enables the visualization of status through 12 LEDs. These 12 LEDs are programmable to see the actual STATUS of each relay in receiver.

Stronger than ever!

Ultra-high impact resistant comer bumper.

Roll-over Protection

When the device is overturned or there is an abnormal handle operation, the EMO will automatically lock and shut down in the overturned state, and the latter will invalidate the command.

My key: Always in safe hands

The function make the device can only be used by authorised personnel, such as operating speed and safety-relevant functions.

My Key

QI wireless charging pad

No more messy and incompatible cables, charging is just that easy.


My Drive, My Secretary

If the original transmitter is broken, you can just pick up the battery bay and change the device itself. My Drive in the battery bay memorize all your settings. To activate a spare transmitter, the operator only needs to install the original battery bay on the backup device.



JUUKO Industrial Radio Remote Control
SHUN HU Technology Co., Ltd
No.21, Zhonggong Rd., Xihu Township,

Changhua County 514, Taiwan



Tel:  +886-4-882-8899
Fax: +886-4-882-2001

Office Hours:


08:30~12:00, 13:00~17:30

(GMT/UTC +8)

Copyright © 2020 by JUUKO

Industrial Radio Remote Control  

SHUN HU Technology Co., Ltd